User Manual

3-6 ADS FlowShark IS Manual
Installing the Sensors i n t he Pipe
This section includes the procedures for performing sensor
installations using one of the following methods:
 Standard Installations
 Special Installations
Standard Inst a lla t ion
Performing a standard sensor installation involves the following
process:
 Gathering the parts and supplies
 Gathering the tools and equipment
 Assembling the ring
 Mounting the sensors on the ring
 Securing the cables to the ring
 Installing the ring in the pipe
Gathering Parts and Supplies
Obtain the following supplies before installing the ring and sensors
to prevent any costly delays. When ordering, specify the FlowShark
IS flow monitor ring-mounted installation hardware.
Quantity Description ADS Part Num b er
1 FlowShark IS flow monit or (i ncludes internal
battery)
5000–IS1–US–01
1
1 monitor m ounting brack et I40–0003
1 IS Ult ras oni c Depth Sens or 106186A–35 (ft)
as needed IS Ult ras oni c Depth Sensor Extension Cable 106137A–xxx
2