User Manual

6-24 ADS FlowShark IS Manual
Activating the Moni t or
After configuring the monitor, activate the monitor to initiate the
flow monitoring process based on the monitor configuration.
Monitor activation involves generating the activation data using the
Profile software, downloading this data to the monitor, and
initiating flow data measurement and logging. The activation data
includes the current monitor firmware (embedded software) and
relevant portions of the LIF and other configuration parameters
necessary to ensure monitoring activities reflect the specific site
conditions and project requirements. The monitor requires these
files and information to properly measure and record the flow.
Note: If the monitor has been deactivated (configured to
no longer wake-up and take measurements), the user must
communicate directly with the FlowShark IS monitor
through a serial connection before remote communications
can be resumed.
Monitor activation occurs through the Diagnostics tool in Profile.
Activate the monitor in the following way:
1. Select the monitor location you want to activate from the
Profile main screen, and then click on the Diagnostics toolbar
button.
The Monitor Diagnostics dialog displays.