User Manual

Configuration and Activation 6-21
2. Select Communication Paramet ers from the Functions drop-
down list, and click on the Perform button.
The Select Co mmunication P aram e te rs dialog displays.
Select Communicati o n P ar ameters dialog
3. Select or enter the communication parameters as necessary:
 Modem Name Select the modem you want to use during
modem communication from the drop-down list. This list
should include all available modems on your computer.
 Modem Port Select the proper port for modem
communication from this drop-down list. This list should
include all available ports on your computer.
 Serial Port Select the proper port for serial
communication from this drop-down list. This list should
include all available ports on your computer.
 DMI Port Select the proper port for communication using
the DMI from this drop-down list. This list should include
all available ports on your computer.
 Timeout Enter the number of seconds you want your
local computer to wait for a response from the monitor
once communication has been initiated.