User Manual

Configuration and Activation 6-5
3. Enter the new Location Name. Monitor names must follow this
convention depending on length:
 Use unique names when choosing names that are 8
characters or less in length (e.g., FSIS1, FSIS2, FSIS3).
 For longer names, up to the first 8 characters can be the
same for multiple monitors, provided an underscore (_)
follows those characters and the characters following the
underscore are unique (e.g., FlowShrk_01, FlowShrk_02,
FlowShrk_03).
4. Enter the new location Description.
5. Select FlowShark IS from the Series drop-down list.
6. Select the appropriate method of communication from the
Connect U sing drop-down list.
7. (applies only to wireless communication) Enter the monitor
location IP Address for the wireless connection.
Note: Do not use leading zeros before or within the IP
address. For example, an IP address of 166.213.006.020
should be entered as 166.213.6.20.
8. Enter the Ser ial Number.
9. Choose one of the following methods for collecting monitor
data using Profile:
 Auto Collection Select the Autocollect checkbox to
ensure Profile collects data ranging from the last
timestamp collected or a user-defined start date and time to
the current date and time. Edit the corresponding Start
time field as necessary. Profile defaults to this op tion.
 Manual Collection Deselect the Autocollect checkbox
to ensure Profile collects data based on the range
designated by the user in the M anual Collec t ion section.
Edit the corresponding Start time and End t ime fields as
necessary. The Autocollect checkbox must be deselected
to enable modification of these fields.