Owner manual

3-28 ADS FlowShark Manual
Quantity Description ADS Part Number
as
required
ultrasonic depth sensor surcharge
mounting bracket
I40-0010
1 special predrilled 8-foot metal band I40-0007
1
Extension cables can be ordered in specific lengths up to 300 feet. Note
the desired length (in feet) in the xxx portion of the part number. For
example, if the application requires a 50-foot extension cable for an
ultrasonic depth sensor, the part number would be 103228A–050.
2
Pressure depth sensors also are available in 0–15 PSI (p/n 3704–0042–
35) and 0–30 PSI (p/n 3704–0016–40).
Gathering the Tools and Equipment
Gather the following tools for the installation:
 Battery-powered hammer drill with assorted bits, including the
following at a minimum:
 3/8-inch x 4-inch (minimum length) masonry bit
 ¼-inch masonry bit (F35-0018)
 5/16-inch carbide-tipped drill bit (include smaller bits)
 4-pound hammer
 Rubber mallet
 24-inch carpenter’s level
 Wrenches
 Screwdrivers (flathead and Phillips head of assorted sizes)
 3/8-inch x 16-inch threads tap
 Diagonal wire cutters
 Folding carpenter’s rule with a brass slide
 Mastic tape (ADS p/n 507193) or rubber coaxial stretch tape