Owner manual

3-26 ADS FlowShark Manual
Performing a special installation involves the following process:
 Gathering the parts and supplies
 Gathering the tools and equipment
 Mounting the ultrasonic depth sensor
 Mounting the Doppler velocity sensor
 Mounting the pressure depth sensor
 Securing the cables to the band
Before beginning the installation, conduct a thorough investigation
of hydraulic and other site conditions. The hydraulics of a site
directly affect the monitor's ability to accurately measure flow depth
and velocity. In addition, measure the horizontal and vertical pipe
dimensions carefully. Even slightly inaccurate pipe dimensions can
significantly skew and misrepresent flow data.
Caution: Handle all sensors and cables with extreme
care. The sensors and cables contain delicate mechanisms
and electronics. Keep sharp objects away from sensor
cables, and avoid stepping or placing heavy objects on the
cable during installation.
Gathering Parts and Supplies
Be sure to obtain the following supplies before performing a special
installation to prevent any costly delays. When ordering, specify the
FlowShark flow monitor special installation hardware.
Quantity Description ADS Part Number
1 FlowShark flow monitor varies with
configuration
1 monitor mounting bracket I40-0003
1 ultrasonic depth sensor 103262A-30
as
needed
ultrasonic depth sensor extension
cable
103228A-xxx
1