Owner manual

Sensor Installation and Connection 3-7
Quantity Description ADS Part
Number
as
needed
Ultrasonic depth sensor extension
cable
103228A-xxx
1
1 Doppler velocity sensor with two 4-40
x 5/16-inch stainless steel screws
103260A-35
as
needed
Doppler velocity sensor extension
cable
103180A-xxx
1
1 pressure depth sensor (0 – 5 psi)
with two 4-40 x 5/16-inch stainless
steel screws
3704-0041-35
2
as
needed
Pressure depth sensor extension
cable
103277A-xxx
1
1 replacement dryer tube 3704-0032
1 direct connection cable 5000-0601
15
¼- × 2 ¼-inch stainless steel anchor
bolts
I01-0002
1 3/8-inch x 3-inch anchor bolt and nut I01-0003
2 3/8-inch x 1-inch stainless steel hex
bolts
I01-0001
4 3/8 – 16 stainless steel hex nuts I15-0002
5 3/8-inch stainless steel flat washers I55-0001
1 3/8-inch x 2-inch studs I01-0009
15 plastic push mounts I01-0006
15 11-inch cable ties I05-0003
25 4-inch cable ties I05-0001
15 8-inch cable ties I05-0002
15 anchor cable ties I05-0004
1 stainless steel ring (sized for pipe) I25-0081 to 0094
3
1 18-inch stainless steel crank handle I10-0012
1
Extension cables can be ordered in specific lengths up to 300 feet. Note
the desired length (in feet) in the xxx portion of the part number. For