User Manual

Table of Contents v
Wiring the ExPAC/XBUS/XIO to the Monitor .... 5-29
Final Instructions .................................................. 5-36
Chapter 6 Configura tion and Activation .. 6-1
Hardware and Software Compatibility .................... 6-2
Starting Qstart ......................................................... 6-2
Setting Up the Qstart Parameters ............................ 6-3
Configuring the Monitor Location ................................. 6-7
Create and Configure the Monitor Location ........... 6-7
Con figure the Monitor i ng Point(s) ........................ 6-10
Assigning and E diting Devices ............................. 6-12
Activating the Monitor ................................................. 6-72
Setting Up the RTU to Retrieve the Current Data
through Modbus ............................................. 6-74
Designating the Data for Retr ieval ........................ 6-74
Verifying the Modbus Output Data ....................... 6-74
Run ni ng Sens or Diagnostics ........................................ 6-76
Performing Confirmations............................................ 6-79
Collecting Data from the Monitor ................................ 6-82
Upgrading the Monitor Firmware ................................ 6-85
Viewing Dia gnostic and Data Log s.............................. 6-87
Chapter 7 Monitor Installation .................. 7-1
Mount ing the Mo ni tor o n Manhole Rung ...................... 7-3
Mount ing the Mo ni tor to the Manhole Wall .................. 7-4
Mount ing the Mo ni tor to the Manhole Rim ................... 7-7
Chapter 8 Analog and Di gi tal Inputs and
Outputs…….. .................... 8-1
Analog Inputs ................................................................. 8-3
Con necting a Third-Party Instrument to an
Analog Input on t he XIO ................................. 8-3
Analog Outputs .............................................................. 8-8
Con necting a Third-Party Device to an Analog
Output on the XIO ........................................... 8-8
Digital Input s ................................................................ 8-13
Con necting a Third-Party Device to a Digital
Input on the XIO ............................................ 8-13