User Manual

2-4 ADS TRITON+ Manual
TRITON+ Flow Monitor
The TRITON+ flow monitor is conta ined in a waterproof, airtight,
cylindrical, high-impact ABS plastic canister housing. It contains a
single processor board attached to the inside of the aluminum
monitor top, a power regulator and cellular modem built into a
protective dome, and a replaceable battery pack.
MONITOR TOP & REGULATOR DOME
IS 12 VOLT BATTERY
EXTERNAL HOUSING
Exploded view of TRITON+ (processor board resides between the monitor
top and protective regulator dome)
Communications
ADS o ffers both remote (wireless) and on-site (direct)
communication options for the TRITON+ monitor.
Wireless Communication
Wireless communication occurs over the 3G/4G UMTS/HSPA+
network using TCP/IP (Transmission Control Protocol/Internet
Protocol). UMTS/HSPA+ TCP/IP facilitates high-speed, low-cost,
efficient digital communication in are a s with UMTS/HSPA+
cove rage using static and dynamic IP ad d r ess services.
Remote c ommunication with the monitor oc curs over the network
through an internal mod em located in the monitor’s regulator dome,
provided a static IP address is in use. If the moni tor is us i ng a