User Manual

10-24 ADS TRITON+ Manual
SIM card properly s eat ed and secured in the holder
10. Replace the cap onto the SIM card enclosur e, and snap the
locks in place to secure the cap.
11. Replace and reconnect the plastic tie b e tween the locks holding
the cap on the SIM card enclosure.
12. Change the APN name (when necessary).
13. Connect an ADS USB Serial Interface cable (ADS p/n 8000-
0337) to the C OMM + EXT PWR port on the monitor (for
battery powered monitors) or a stand ar d A-to-B USB cable to
the USB port on the ExPAC (for externally-powered monitors).
Attach the other end of the USB cable to yo ur laptop co mputer.
14. Reacti vate the moni tor through Qstart.
Note: You must r e a c tivate the monitor thro ugh a dire c t
(serial) connection before you can resume wireless
communications following SIM card replacement.
15. Establish communication with the monitor remotely to verify
communication.
16. Recoil and secure the antenna cable to the cable tie mount
using a cable tie, if necessary. Refer to I nstalling the Antenna
in Chapter 4, Communication, for more information.