User Manual

Monitor Install ation 7-5
4. Twist a nut onto the anchor bolt, but do not tighten it down.
Leave enough space between the nut and the wall for the
thickne ss of the mounting bracket.
5. Mount the b ottom of the bracket onto the monitor mounting
flange with two M8 x 30-mm stainless steel bolts, two M8
stainless steel lock washers, and two M8 stainless steel flat
washers (supplie d with the TRITON+ when shipped).
Bolting the mounti ng bracket to t he f l ange welded to the monit or
6. Carefully lower the monitor into the manhole, and place the
keyhole of the mounting bracke t over t he anchor bol t.