User Manual

Configura tion and Activation 6-69
 Min Value Input the minimum va lue for t he incoming ana log
signal which will be used to scale the data values. This value
represents the weakest signal corre s pondi ng to the incoming
4mA signal. For example, enter the value corresponding to the
lowest depth reading for a DEPTH_A1 input.
 Max Value Input the maximum value for the inco ming
analog signal which will b e used to scale the data values. This
value repr esents the s t rongest signal co rresponding t o the
incoming 20mA signal. For example, enter the value
corresp onding to the highest dep t h read ing for a depth
(DEPTH_A1) input.
The monitor temporarily stores all incoming analog input readings
which occur between each monitor storage interval.
 Average Select this checkbox to store the a nalog input signal
value as an average of all analog input readings since the last
monitor storage interval. If this checkbox is not selected, the
stored analog input value ( when the Sto re Da ta checkbox is
selected) will be the most r e c e nt analo g input
reading. Checkbox is selected by default.
 Store D ata Select this checkbox when to store the analog
input to the monitor memory at the monitor’s storage
interval. (This value is averaged or actual value depe nding on
whether the Average checkbox is selected.) Checkbox is
selected by default.
 Store Min Choose this checkb ox to store the lowest analog
input reading which occurs within each sample interval as the
MIN_A1 data entity. Checkbox is selected by default.
 Store Max Cho ose this checkbox to store the highest analog
input reading which occurs within each sample interval as the
MAX_A1 data entity. Checkbox is selected by default.
 Store Avg Select this checkbox to store an averaged value of
the analog inp ut signal as the AVG_A1 data entity. Checkbox is
selected by default.