User Manual

6-64 ADS TRITON+ Manual
Editing the Analog Device
Use the analog device for TRITON+ monitors to configure up to
eight 4-20mA analog channels in any combinati on of ana l og inputs
or analog outputs. Define inc oming analo g signals and store the
value as AI_1 t hrough AI_ 8 (at the monitor's sample interval).
Define analog o ut puts from a list of available data e ntities and
output the corres pondi ng data value to an external analog device.
Note: The analog device is a custom configuration. Please
consul t ADS pri or to wiri ng and co nfi guring this d evice.
Anal o g Devi ce properties dialog
Configure the analog device for a TRITON+ using t he follo wing
information:
 # Displays the channel number associated with the analog
input or output. Can be modified, if necessary.
 ID Input the Modbus identification corresponding to the
external analog Modbus module. This value is typically found
in the c ustomer's external analog module's user guide.
 Input/Output Select whether the attached analog device is
for a nalog inputs or analog outputs.
 Register Ent er the M odbus registe r cor responding to the
external analog Modbus mod ul e. T his value is typically found
in the c ustomer's external analog module's user guide.