User Manual

6-18 ADS TRITON+ Manual
Modify the parameter s as necessary, and then select OK once
complete.
 DAC Gain Choose the method for managing the
amplification of the analog s i gnal that returns t o the sens or:
− Auto Select this op tion to allow the monitor to
automatically optimize the amplification of the signal.
− Manual Select this option to e nter a fixed value
between -12db (lower amplification) and +12db (high
amplification) at which to amplify the signal.
 Ping Amplitude Choose the method for mana ging the
amplification of the analog signal that is sent out, or
transmitted from, the sensor. Smaller pipe s typically
require weaker (quieter) amplification; larger pipes
typically require stronger (louder ) amplification.
− Auto Select this op tion to allow the monitor to
automatically optimize the amplification of the signal.
− Manual Select this o p tion to enter the percentage of
full amplification at which to tr a nsmit the signal.
Enter a percentage between 10 and 100 percent, where
100 percent represents maximum amplification.