User Manual

Introduction 1-3
The TRITON+ has also been certified for us e in Zone 0 via test i ng
to ATE X (Atmosphere Explosibles) standards. It is certified to
ATEX standards in Europe and for use in all classified (hazardous)
sanitary sewer and ind ustrial hazardous areas. Many rest-of-world
countries accept ATEX certification in lieu of their country-specific
requirements.
The TRITON+ flow monitor has been tested to CSA (Canadian
Standards Association) standards and certified for use in Canada in
Intrinsically Safe and Non-Incendive Systems – Fo r Hazar d o us
Locations. The CSA certification allows demonstrated comp liance
for use in Ex ia IIB T3 (152 C) areas in Canada.
It is the customer’s responsibility to ensure that the certification(s)
provided for the ADS equipment meets the applicable regulatory
requirements.
Note: TRITON+ models include the 8000-FST-IM and
8000-FST-IM-EP.
TRITON+ System Certification
The TRITON+ unit and associated telemetry equipment are
certified for use only with approve d ADS b attery packs, sensors,
communication cables, and telemetry equipment. Connection of
any non-approved devices could result in unsafe operation and will
immed ia te ly void the warranty and IS certification.
Note: Connecting the T elog
®
Ru-33 to the AD S
TRITON+ is an approved application and, therefore, will
not void the TRITON+ warranty. However, because the
Telo g unit is not IS certified, the installation will not be
considered intrinsically safe if the Ru-33 is installed in the
manhole with the monitor.