Operation Manual

GB
Water and waste water
12
98 Adria Motorhomes
12.1.3 Faucet
Drawing of hot and cold water is performed with a single-lever faucet.
Depending on the installation position, the water temperature is controlled either by raising and
lowering or swivelling the lever.
The switch on the faucet only works when the water supply is switched on on the control panel.
Operating the faucet:
 Move the lever (Fig. 76/1) upwards to turn on the water pump.
Water is running.
 Adjust the desired temperature by swivelling the lever (Fig. 76/1).
 Lever in the "red" direction: The water becomes warmer.
 Lever in the "blue" direction: The water becomes cooler (minimum ambient temperature
of the water tank).
 Push the lever (Fig. 76/1) fully downwards to stop the water.
Fig. 76 Faucet
1 Lever (raising/lowering)
2 Lever (swivelling)
1
2