Operation Manual

GB
Sleeping arrangements
9
72 Adria Motorhomes
9.3.3 Converting the seating group into a bed crosswise to the driv-
ing direction
On vehicles with a side seat on the passenger's side, the seating group can be converted into
a single or double bed crosswise to the driving direction.
Converting the seat box on the passenger's side:
 Unlock the seat box.
– The latch (Fig. 56/4) is located at the front of the seat box and must be turned by 90°.
 Then pull out the seat box (Fig. 56/1) to the stop.
 Unlock the table support (Fig. 56/2) and swivel the support by 90° into the corridor.
 Lower the table (Chapter 9.3.1).
 Make a continuous lying area from the cushions of the seat bench and possibly an addi-
tional cushion.
Re-conversion:
 Reconvert the seating group in reverse sequence.
Fig. 56 Pulling out the seat box
1 Seat box
2 Support for table
3Table
4Catch
Caution!
Material breakage
 The table support must be swung out so that the table top can be supported.
123
4