Operation Manual

GB
Sleeping arrangements
9
Adria Motorhomes 69
Raising the lifting bed:
Raise the lifting bed in reverse sequence.
 Remove the antifall guard (Fig. 52/4) from the ceiling.
 Place the bed linen flat on the bed.
 Remove and stow the ladder.
 On lifting beds with electrical operation (special equipment), press the Up button on the
remote control until the bed has reached the highest position.
 On lifting beds with manual operation, turn the handle upwards and push the lifting bed
upwards to the stop.
– Ensure the curtain protection is not caught in the mechanical system of the lifting
bed.
9.2.1 Adjusting or removing the headrest
Depending on the model, the vehicles have installed adjustable headrests at the seating group.
Adjusting the headrest in height:
 Press and hold the left locking(Fig. 53/3).
 With the other hand move the headrest (Fig. 53/1) to the required position.
 To lock the headrest (Fig. 53/1), release the left locking (Fig. 53/3).
Removing the headrest:
 Press and hold the right locking (Fig. 53/2).
 With the other hand pull up the headrest (Fig. 53/1) out of the holder.
 Reconvert the headrest in reverse sequence.
Fig. 53 Adjusting or removing the headrest
1 Headrest
2 Locking right
3 Locking left
10100154
1
2
3