Operation Manual

GB
Living
8
48 Adria Motorhomes
8.8.3 LT 50 control panel
"Mains control" indicator:
 Connect the connector for mains operation to the 230 V mains supply.
– The "Mains control" symbol (Fig. 34/13) lights and the batteries are charged.
– The "Mains control" symbol lights only when the 12 V supply voltage is switched on.
"12 V On" rotary setting button:
 Briefly press the rotary setting button (Fig. 34/10) to switch the supply voltage for the 12
V appliances on or off.
The "12 V On" control lamp (Fig. 34/1) lights when the 12 V appliances are switched on.
 Switch off the 12 V appliances when you leave the vehicle for a longer period of time.
Checking the battery voltage:
The 12 V supply voltage must be switched on to display the battery voltage.
 Turn the rotary setting button (Fig. 34/10) until the desired battery symbol (Fig. 34/8) or
(Fig. 34/9) lights.
The scale legend "Volt" (left) lights and the battery voltage of the selected battery is
shown on the LED scale concerned (Fig. 34/11) or (Fig. 34/12).
Checking the tank fill levels:
The 12 V supply voltage must be switched on to display the tank fill levels.
 Turn the rotary setting button (Fig. 34/10) until the desired tank symbol (Fig. 34/6) or
(Fig. 34/7) lights.
Fig. 34 LT 50 control panel
1 "12 V On" control lamp
2 "Pump" symbol
3 "Waste water tank" LED scale
4 "Water tank" LED scale
5 "Tank heater" control lamp
6 "Waste water tank" symbol
7 "Water tank" symbol
8 "Living area battery" symbol
9 "Starter battery" symbol
10 Rotary setting button
11 "Vehicle battery voltage" LED
scale
12 "Living area battery voltage" LED
scale
13 "Mains control" symbol
Important!
Note that the power supply continues to the entrance step and the awning light, for exam-
ple, even with the main switch switched off.
Important!
The indicator goes off after approx. 20 s when no button is pressed in this time.
10100151
13,5 V
13,0 V
12,7 V
12,5 V
12,2 V
12,0 V
11,5 V
11,0 V
100 %
75 %
50 %
25 %
1
2
3
4
5
6
7
8
9
10
11
12
13