Operation Manual

Heater & hot water

Adria Motorhomes 107

13.1.5 Heating properly

Several air outlet nozzles (Fig. 83/1) are built into the vehicle. Pipes and flexible hoses conduct

the warm air to the nozzles.

Distributing the warm air:

 Close the air outlet nozzles on the instrument panel of the basic vehicle to prevent

draughts.

 Set the air distribution of the basic vehicle to air circulation.

 Adjust the air outlet nozzles (Fig. 83/1) so that the warm air escapes at the desired posi-

tions only.

Adjusting the air outlet nozzles:

 Fully open the air outlet nozzle (Fig. 83/1) to conduct the full warm air flow to the desired

position.

The more the air outlet nozzle is closed (Fig. 83/1), the less warm air flows out.

The more air outlet nozzles are open, the less warm air flows out at the individual noz-

zles.

13.1.6 Switching the heater off

 Set the rotary switch to "Off" (Fig. 81/6).

 The fan can continue to run after switching off in order to utilise the residual heat. The

green indicator lamp flashes.

 Close the "heater" quick-action stop valve 11.7 when the heater is not used for an

extended period of time.

 Close the gas cylinder shut-off valve 11.6 when no other gas appliance is in operation.

Fig. 83 Air outlet nozzle

1 Air outlet nozzle