Operation Manual

GB
Power supply
10
70 Adria Caravans
10.3 12 V power supply
10.3.1 Power supply unit CSV 300-X
The power supply unit is designed for use in caravans without own living area battery and
therefore cannot be used to charge batteries.
Connected appliances can be supplied with 12 V current from the towing vehicle when the
230 V mains voltage is not available.
Mains operation is switched to automatically as soon as the 230 V mains voltage is available.
The power supply unit comprises:
The power supply module
The complete 12 V distribution
The fuse protection for the 12 V electric circuit
The following 12 V outputs are supplied with power when the power supply unit is fed 12 V from
the starter battery of the towing vehicle without the 230 V mains being connected:
CSV 300 circuits 1 to 5 receive power
CSV 300-2 circuit 1 receives power, circuits 2 to 5 do not receive power
CSV 300-3 circuits 1 to 4 receive power, circuit 5 does not receive power
Permanent power supply to all electric circuits is possible when operating with a towing vehicle.
Refer to the separate operating instructions for information in this context.
Warning!
Risk of burns
The power supply unit becomes hot when in use. Do not touch.
Replace defective fuses only when the power supply unit has been de-energised.
Caution!
Damage to power supply unit
Replace defective fuses only when the power supply unit has been de-energised.
Replace defective fuses only when the cause of the defect is known and has been rem-
edied.
Never bridge or repair fuses.
Use only original fuses with the values specified in the operating instructions.
Do not lay any cables underneath the power supply unit due to the heat generation.