Operation Manual

DD
Living 8
Adria Motorhomes 31
8.5 Window blinds and insect screens
8.5.1 Blind and insect screen - version 1
The blind (Fig. 11/1) is located in the bottom part of the window frame.
The insect screen (Fig. 11/3) is installed in the top part of the window frame.
Opening and closing the blind:
 Press the two pushbuttons (Fig. 11/2) together.
 Slide the blind to the desired position.
Releasing the two pushbuttons automatically clamps the blind in place.
The blind (Fig. 11/1) has a restricting device so that it can be latched into place at different
latching positions.
Opening and closing the insect screen:
 Pull the insect screen (Fig. 11/3) down until the catch (Fig. 11/4) latches into place in the
blind (Fig. 11/1).
The insect screen (Fig. 11/3) can be operated only in combination with the blind (Fig. 11/1).
Separating the insect screen from the blind:
 Press on the upper catch (Fig. 11/4) of both blinds.
Caution!
Damage to insect screen
 When you unlock the blind/insect screen, hold on to the insect screen (Fig. 11/3), other-
wise it will snap up with spring tension. Snapping up could damage the screen spring
and the insect screen.
 Only close the blind to a maximum of 75% during direct sunlight. Air must be able to cir-
culate.
Fig. 11 Opening and closing the blind and insect
screen - version 1
1 Blind
2 Pushbuttons
3 Insect screen
4 Catch
5 Side catches (extra for wide
blinds)
10100083
3
5
2
1
4
5