Operation Manual

DD
Living 8
Adria Motorhomes 29
8.3.3 Permanent ventilation
Setting the window to the "permanent ventilation" position
 Open the locking levers as described in Chapter 8.3.2.
 Pull the window back until it is almost closed
 With a locking lever (Fig. 8/1) with securing button, make sure the latch plate (Fig. 8/2)
fits properly in the fork (Fig. 8/3) when closing the lever (Fig. 8/1).
 With a locking lever (Fig. 8/1) without securing button, make sure the locking catch
(Fig. 8/4) fits properly in the recess of the locking plate (Fig. 8/2) when closing the lever
(Fig. 8/1).
Caution!
Cracks in the window
 For permanent ventilation, close only the levers (Fig. 6/2) at the bottom edge of the
window in the "permanent ventilation" position, otherwise the window pane is bent. This
could result in the formation of cracks in the acrylic glass window.
 Ensure all bottom catch bars are closed in the same position, otherwise, the window
could be distorted.
Fig. 8 Hinged window in permanent ventilation posi-
tion
1 Lever
2 Latch plate
3 Fork
4 Locking catch
2 13
4