User Manual

Advanced RF Technologies, Inc.

5.5.4 System – Update

 To perform a firmware update, click on the Update tab and the following screen will appear.

Figure 5-29 System: Update

 Click on the Choose File button and locate the firmware file.

 Click on the Upgrade button to perform the firmware update.

 Once the firmware update is complete, the following popup message will appear:

Figure 5-30 System: Update is Complete Popup Message

5.5.5 System – Backup / Restore

The Backup / Restore section allows the user to save the settings of the repeater. To perform the backup, click

on the Backup button and you will be prompted to save the backup file. To restore the settings to the system,

click on Choose File button, select the backup file, and click the Restore button.

Figure 5-31 System: Backup / Restore