User Manual

Advanced RF Technologies, Inc.

5.4.6 AAI Input

The PSR-78-9537-XB can accept a dry contact input alarms. The alarm can be labeled in this section. Once the

alarm is labeled, it will show up in the system with the new custom names on the Status tab. This feature is only

available if the Emergency Power Off switch function is not being utilized.

Figure 5-21 Install Tab – AAI Input

5.4.7 Location Info / Installer Info

This section allows the user to specify the address of the repeater and also the information of the installer.

Figure 5-22 Install Tab – Location Info / Installer Info

5.4.8 Date & Time

This section allows the user to specify the current date and time.

Figure 5-23 Install Tab – Date & Time