User Manual

Advanced RF Technologies, Inc.
33
5.2.3 Alarms
This section displays the alarm status for System alarms, RF Alarms, and Power alarms. If an alarm is present in
the system, then the color of the alarm tab will change according to the type of failure.
Figure 5-5 Status Tab – Alarm Display
5.2.4 AAI
This section displays the AAI alarm status for each dry contact alarm. Red indicates that the dry contact alarm is
active and light blue indicates the alarm is inactive. If the Remote Power Switch function is enabled, then the AAI
Alarm In status will not be present from the AAI alarm status since this function is disabled when the Remote Power
Switch is enabled.
Figure 5-6 Status Tab – AAI Alarm Display (Remote Power Switch Disabled)
Figure 5-7 Status Tab – AAI Alarm Display (Remote Power Switch Enabled)