User Manual

Advanced RF Technologies, Inc.

4.1.2 PSR-ANN Annunciator Installation

The PSR-ANN annunciator box has been designed to either mount on top of the PSR-78-9537-XB repeater or

can also be wall mounted separately. By default, the mounting bracket is configured to mount to the top of the

repeater with the mounting bracket at the bottom of the PSR-ANN annunciator box. If individually wall mounting

the PSR-ANN, then the bracket will need to moved from the bottom of the box to the back of the box.

Once the PSR-ANN annunciator box has securely mounted, connect the included power/data cable from the

side of the PSR-ANN box to the port labeled Annunciator on the PSR-78-9537-XB.

Figure 4-2 PSR-ANN Repeater Mount