User's Manual

Advanced RF Technologies, Inc.

5. REPEATER INSTALLATION

5.1 Installation Procedures

5.1.1 Wall Mount Procedure

 Verify that the PSR-78-8527 and mounting holes are in good condition

 Place the PSR-78-8527 mounting bracket template up against the wall and mark off mounting holes

 Drill the appropriate size holes and install the included wall anchors

 Remove the wall mount bracket from the repeater and bolt the wall mount bracket to the wall

 Place the repeater onto the wall mount bracket and secure the bracket to the repeater

 Connect the GND cable

 Connect the Antenna cables

 Connect the Power cable

Figure 5-1 Wall Mount

Wall Mount

Bracket