User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM700F-9543-ICS-X Web-GUI Setup
- 6. Maintenance Guide for AXM700F-9543-ICS-X Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
Advanced RF Technologies, Inc.
34
Figure 5-19 Location Setting
5.4.4 Modem Box Settings
This section allows the user to specify an alternative Repeater IP, Subnet Mask, and Gateway settings. These
settings are enabled when the Host/Remote switch is set to the Remote position. When the Host/Remote switch
is changed, the repeater will reboot and will result in a temporary loss in coverage.
Figure 5-20 Modem Box Setting
5.4.5 Auto Installation
Figure 5-21 Auto Installation
The Auto Installation routine can be run by clicking on the Install button. The Auto Installation routine runs
basic system checks to ensure proper functionality.