User's Manual

Advanced RF Technologies, Inc.
20
2.2.4 Back Up Battery Port
Figure 2-5 Battery Backup Port
The AXM700F-9543-ICS-X can be connected to an ADRF-BBU (ADRF Battery Backup Unit) to provide power
during a power failure. If an ADRF-BBU is utilized, connect the ADRF-BBU to the AXM700F-9543-ICS-X via the
external battery port.
(WARNING: The circuit breaker switch on the ADRF-BBU must be set to OFF before connecting the ADRF-BBU
to the AXM700F-9543-ICS-X to prevent damage to the repeater or the ADRF-BBU and personal injury.)
Note: Please contact ADRF Technical Support for assistance if you are unfamiliar with the installation
procedure of the battery box.
2.3 RF Ports
Figure 2-6 RF ports
2.3.1 RF Ports
• DONOR – DIN female which is used to connect the donor antenna
• DONOR_CPL (30dB) – SMA female 30 dB coupling port which is used to monitor the amplified UL signal
• MODEM_ANT – SMA female port which is used to provide RF signal to the optional internal modem box
• SERVER_CPL (30dB) – SMA female 30 dB coupling port which is used to monitor the amplified DL signal
• SERVER – DIN female which is used to connect the server antenna