User's Manual

Advanced RF Technologies, Inc. 10

1. INTRODUCTION

The AXM700-9543 is an over-the-air high power repeater.

1.1 Highlights

• Band Selectable (Lower A, Lower B, Lower A + Lower B, Upper C)

• Digital filtering with sharp roll-off (>50 dBc @ + 1 MHz from sub-band edge)

• Remote monitoring and control capability using our Web-based GUI

• 95dB on the downlink and about 82dB on the uplink of max gain and 43dBm Composite power

• LED panel provide signal strength and alarm status

• Support optional internal modem box for remote access and alarming

• Configurable network setting in order to interface with 3rd party external modem boxes

• Adjustable AGC Output Power Level

• Supports Network Management Monitoring System via SNMP

• Incremental Automatic Shutdown/Resumption Time: AXM700-9543 gradually increases the time span

between automatic shutdown and resumption before it permanently shuts itself down

• Versatility and Usability: AXM700-9543 gives total control to the user. Most of the control parameters, e.g.,

gain, output power, alarm threshold, etc. can be changed using the Web-GUI so that the user can adjust the

system perfectly to the given RF environment

• Web-GUI connectivity via DHCP

• Supports DHCP; No 3

party GUI software required

• Automated installation

• Adjustable center frequencies by 1kHz step

• Direct ray cover on heat-sink to prevent direct light (Front door)

• Membrane vent to prevent moisture by condensation