User's Manual

Advanced RF Technologies, Inc. 22
4. INSTALLATION
4.1 Installation Procedures
4.1.1 Wall Mount Procedure
• Verify that the AXM700-9543 and mounting hole are in good condition
• Place the AXM700-9543 mounting template up against the wall and mark of mount holes
• Mount the AXM700-9543 to wall use the six (6) mounting hole on the wall mount bracket
• Connect the GND cable
• Connect the Antenna cable
• Connect the Power cable
Figure 4-1 AXM700-9543 Wall Mount
4.2 Grounding
Install the ground cable that is included in the package at the back of the repeater as show in the figure below.
Figure 4-2 Ground Cable Connection
• Round ground terminals are located on the side of the repeater.
Mount bracket