User's Manual Part 3

Advanced RF Technologies, Inc.
85
8.2.3.3.1 General Setting
To enable any of the settings, click on the checkbox and click the Apply button.
Figure 8-42 General Setting (Control – RFU) (Admin)
Figure 8-43 General Setting (Control – RFU) (User)
Table 8-14 Description for General Setting
Name
Description
Available Accounts
Downlink ALC
Enables or disables Downlink ALC
Administrator
Uplink ALC
Enables or disables Uplink ALC
Administrator
Downlink ON
Enables or disables the RFU Downlink path
Administrator, User
Uplink ON
Enables or disables the RFU Uplink path
Administrator, User
Uplink Noise Det
Displays if the module is turned on or off due to the UL Noise Detection
Routine
Administrator
8.2.3.3.2 Reboot / Factory Setting
Allows the user reboot or restore factory settings of the RFU.
Figure 8-44 Reboot & Factory Setting (Control – RFU)
8.2.3.3.3 Uplink Noise Detection (Admin Only)
Figure 8-45 UL Noise Detection (Control – RFU)