User's Manual Part 2

Advanced RF Technologies, Inc.

6.2.3.2 Wall mounting the ADX-H-OEU

 Mount procedure

- The following steps should be followed while mounting the ADX-H-OEU



 Verify that the OEU and Mounting hole are in good condition

 Drill holes(4holes, 6Φmm) in the installation surface then insert the enclosed anchor bolts

 Set the ADX-H-OEU against the wall

 Make sure the OEU is securely attached

 Connect the RF cable

 Connect the Antenna cable

 Connect the Power

 Connect the Optic cable

Figure 6-9 ADX-H-OEU Wall Mount Instructions