User's Manual Part 1

Advanced RF Technologies, Inc.
37
 The ID of master RU can be set manually using ADDR switch. This switch should only be use if instructed by
ADRF Technical Support.
3.2.2 ADX-R-xxxS/ADX-R-BTxxS/ADX-R-VU25S (Slave RU)
ADX-R-C30S
DL IN
SERVER
CPL(-30dB)
UL OUT
EF-DL OUT EF-DL IN EF-UL IN EF-UL OUT
DC IN +27VON/OFF
OUT
POWER
SOFT FAIL
HARD FAIL
IN
Figure 3-26 Slave RU Front & Rear View (excluding BT and VU)
ADX-R-BT33S
DL IN
SERVER
CPL(-30dB)
UL OUT
DC IN +27VON/OFF
OUT
POWER
SOFT FAIL
HARD FAIL
IN
Figure 3-27 Slave RU Front & Rear View (BT)
DC IN +27VON/OFF
OUT
POWER
SOFT FAIL
HARD FAIL
IN
Figure 3-28 Slave RU Front & Rear View (excluding VU)
 Functions & Features
- Transmits DL signal and receives UL signal through server antenna port
- Individually wall-mountable or 19” rack-mountable (requires ADX-R-CHA)
- Supports external filters via DL and UL pass-through ports
 Specification
- Size: 11.8 x 9.8 x 3.7 inches (300 x 249.6 x 94.5 mm)
- Weight: 11.7 lbs (5.3 kg)
3.2.2.1 LEDs
ADX-R-x30S has the following LEDs on the front of the Slave RU as shown below in Figure 3-29.
ADX-R-VU25S
DL IN
DL OUT
CPL(-30dB)
UL OUT
UL IN