User's Manual

Advanced RF Technologies, Inc.

8.2.3.3.1 General Setting

To enable any of the settings, click on the checkbox and click the Apply button.

Figure 8-42 General Setting (Control – RFU) (Admin)

Figure 8-43 General Setting (Control – RFU) (User)

Table 8-14 Description for General Setting

Name Description Available Accounts

Downlink ALC

Enables or disables Downlink ALC

Administrator

Uplink ALC

Enables or disables Uplink ALC

Administrator

Downlink ON

Enables or disables the RFU Downlink path

Administrator, User

Uplink ON

Enables or disables the RFU Uplink path

Administrator, User

Uplink Noise Det

Displays if the module is turned on or off due to the UL Noise Detection

Routine

Administrator

8.2.3.3.2 Reboot / Factory Setting

Allows the user reboot or restore factory settings of the RFU.

Figure 8-44 Reboot & Factory Setting (Control – RFU)

8.2.3.3.3 Uplink Noise Detection (Admin Only)

Figure 8-45 UL Noise Detection (Control – RFU)