User's Manual

Advanced RF Technologies, Inc.
62
6.4 Optic Port Cleaning
x We recommend cleaning optic connector using a dry optical cleaning swab or tissue in a dry environment as
needed. We recommend cleaning the optic connectors only if the expected optic loss is higher than the loss
reported in the Web-GUI by 1.5dBo. (Figure 6-12)
x When optic connector are not in use, the port should be covered with a protective dust cap. (Figure 6-13)
Figure 6-12 Optic Connector Cleaning (left) and Optic Port Cleaning (right)
Figure 6-13 SC/APC Optic Connector Dust Cap