User's Manual

Advanced RF Technologies, Inc.
19
2. BLOCK DIAGRAM
Do not remove the protective covers on the fiber optic connectors until a connection is ready to be
made. Do not leave connectors uncovered when not connected.
The tip of the fiber optic connectors should not come into contact with any object or dust.
Refer to the cleaning procedure for information on the cleaning of the fiber tip.
Care of Fiber Optic Connectors
Fiber optic ports of the ADX DAS emit invisible laser radiation at the 1310, 1550nm wavelength
window.
To avoid eye injury never look directly into the optical ports, patch cords or optical cables. Do
not stare
into beam or view directly with optical instruments. Always assume optical output is on.
Only technicians familiar with fiber optic safety practices
and procedures should perform optical
fiber
connections and disconnections of the ADX DAS and the associated cables.
The ADX DAS
complies
with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser
notice No.50 (July26. 2001)@IEC 60825
-1, Amendment2 (Jan. 2001).
Laser Safety