User's Manual
Advanced RF Technologies, Inc.
47
5.2 HRU
5.2.1 Wall Mount
ADX-HRU is support only wall mount.
Figure 5-3 HRU Wall Mount
6. INSTALLATION
6.1 Pre-Installation Inspection
Please follow these procedures before installing ADX HRU equipment:
o Verify the number of packages received against the packing list.
o Check all packages for external damage; report any external damage to the shipping carrier. If
there is damage, a shipping agent should be present before you unpack and inspect the contents
because damage caused during transit is the responsibility of the shipping agent.
o Open and check each package against the packing list. If any items are missing, contact ADRF
customer service.
o If damage is discovered at the time of installation, contact the shipping agent.
o Verify the AC voltage with DVM (Volt meter) is 110V AC. Incorrect AC voltage can damage the
ADX equipment.
o This power of this system shall be supplied through wiring installed in a normal building. If
powered directly from the mains distribution system, it shall be used additional protection, such
as overvoltage protection device.
o Over voltage category(OVC) & Pollution degree(PD)
Over voltage category (OVC)
OVC II