User's Manual

Advanced RF Technologies, Inc.
41
Figure 3-29 HRU LED
Table 3-6 Master HRU LED Specifications
ADX DAS-Module Specifications
Power
Solid Green
Module power is ON
OFF
Module power is OFF
3.2.3 AC On/Off Switch, AC Port
Figure 3-30 HRU AC Port
Figure 3-31 HRU AC Switch
The AC Power on/off switch is located on PSU in the enclosure of each ADX-HRU.
The ADX-HRU is operated at the only 110V AC.
The socket-outlet shall be installed near the equipment and shall be easily accessible
(WARNING: The AC switch must be set to OFF before cable connection to avoid equipment damage and
personal injury.)
(WARNING: To avoid damage, be sure 110V AC for operation of ADX-HRU.)
(CAUTION: DOUBLE POLE/NEUTRAL FUSING.)
The procedure for connecting HRU