User's Manual Part 2


AdvancedRFTechnologies,Inc.  107

 SettingRestore
Restorefunctioncanbeusedtorestorethesavedsettingsfromthebackupfile.Oncethebackupfileisloaded,
thetreeinthefigurebelowwillappear.Checktheboxesofthemodulesthatyouwouldliketorestoreandthen
clickthe“Restore”buttonatthe
bottomonthissection.
We recommend creating a new backup file if adding or removing modules from the ADX.Discrepancies
betweenthebackupfileandtheexistingtreecouldcauserestoreerrors.

Figure8‐92 SettingRestore
8.2.5.6 System:SNMP
 SNMPV1/V2
Thissectionallowsyoutoaddcommunity
stringsforSNMPv1andv2.

Figure8‐93 SNMPV1/V2
