User's Manual Part 2


AdvancedRFTechnologies,Inc.  97

8.2.4.2.1 RFUCommissioning
This section allows the user to perform RFU commission. To perform RFU commissioning, select a DL Input
Commissioning Level from the dropdown menu and click Apply. The commissioning progress is displayed on the
CommissioningProgressbar.Anyerrors,warnings,andmessageswillappearviaapopupwindow.Please
referto
theADXInstallationGuidetodeterminetheproperRFUcommissioninglevels.

Figure8‐70 RFUCommissioning(Install–RFU)
8.2.4.2.2 Description
ThissectionallowstheusertosetthedescriptionofRFU.

Figure8‐71 Description(Install–RFU)

8.2.4.3 Install–OPT

Figure8‐72
Install–OPT
8.2.4.3.1 OpticCommissioning
This section will allow the user to perform any optic compensation if it is necessary.The Commissioning
buttonwillturnorangeifopticcompensationisneeded.