User's Manual Part 2

Table Of Contents



AdvancedRFTechnologies,Inc.  94



8.2.4.1.2 SNMP



Figure8‐62 SNMP(Install–NMS)

The SNMP section allows you to specify the Site ID and Manager IP.The Site‐IDis the code that is used to

identifyaparticularmodule.TheManagerIPfieldiswheretheuserinputstheIPaddressofthe

NOCsystemthat

isbeingusedtomonitortheSNMPtraps.



8.2.4.1.3 Location

Thissectionallowstheusertoinputthelatitudeandthelongitudeoftherepeater.



Figure8‐63 LocationSetting(Install–NMS)

 SelectNorSfromthedropdownmenuforLatitude

 SelectE

orWfromthedropdownmenuforLongitude

 Inputthefirst3numbersofthelatitude/longitudeinthetextareaafterthe“+”andbeforethe“.”

 Inputthelast6numbersofthelatitude/longitudeinthetextareaafterthe“.”



8.2.4.1.4 ExternalModemBoxSettings

This

 section allows theusertospecifyanalternative IP, Subnet Mask,and Gateway settings.These settings

areenabledwhentheHost/RemoteswitchissettotheRemoteposition.



Figure8‐64 ExternalModemBoxSetting(Install–NMS)



8.2.4.1.5 Description