User's Manual Part 2


AdvancedRFTechnologies,Inc.  82

8.2.3 ControlTab
8.2.3.1 Control–NMS

Figure8‐33 Control‐NMS
8.2.3.1.1 HeartbeatTime
AllowstheusertoenableordisableSNMPtrapsfrombeingsentoutand alsospecify theHeartbeatinterval.
Timeanddatestampsofthelast2heartbeatswillbedisplayedinthe“Lastheartbeat
sentout”section.

Figure8‐34 Heartbeat(Control–NMS)
8.2.3.1.2 HESystem
AllowstheusertoperformaHEsystemrebootorHEfullsystemfactorysettings

Figure8‐35 HESystemReboot&FactorySetting(Control–NMS)
8.2.3.1.3 NMSSystem
AllowstheusertoperformaNMS
UnitrebootorNMSfactorysettings

Figure8‐36 NMSSystemReboot&Factor ySetting(Control–NMS)
