User's Manual Part 2


AdvancedRFTechnologies,Inc.  76

Table8‐9 SummaryDescription
Parameters Description
Connected DisplaysthenumberofRemoteModule’sconnectedtotheADX‐H‐OPT.
SoftFail Displaysthetotalnumberofsoftfailpresent.
HardFail Displaysthenumberofhardfailpresentoneachmodule.
LinkFail Displaysthenumberoflinkfailpresentoneachmodule.
NotCommissioned Displaysthenumberofnon‐commissionedorcommissionfailedmodule.
Commissioned Displaythenumberofsuccessfullycommissionedmodule
8.2.2.4.2 RFStatus
DisplaystheDLinputpowerandtheULoutputpowerforeachODU.
AnODURackiscomposedof2ODUs.

Figure8‐21 RFStatus(Status– OPT)
8.2.2.4.3 OpticStatus
DisplayLDPowerandPDPowerforeachopticpath.LDPoweristhepower
thatisbeingsenttotheRUand
PDPoweristhepowerthatisbeingreceivedfromtheRU.

Figure8‐22 OpticStatus(Status–ODU)
8.2.2.4.4 OpticAtten(AdminOnly)
TheADX‐H‐ODUhas3typesofattenuators.
 DownlinkCommonAttenuator‐Displaysthecommonattenuation
levelontheDLpath.
 UplinkCommonAttenuator‐DisplaysthecommonattenuationlevelontheULpath.
 UplinkOpticAttenuator‐Displaystheamountofattenuationusedateachopticallink.
