Instructions/Assembly Guide

1.Table is now ready for use.
Periodically (every 90 days) make sure that the screws are still fully tightened.
ATTENTION: Be certain that all screws are fully tightened before using table
1
2
1.Ensure all parts have been removed from the carton and place on a protected
surface or carpet.
2.Check all parts and hardware are the same as the “Parts List”.
3.Upside down top unit (1) at a protected surface.
4.Place bottom unit (2) onto top unit (1) back and secured with 4 x bolt screws (A),
tighten by Allen key(B).
5
Assembly Instructions
End Table