Instructions/Assembly Guide

3 Drawer Side Table

Assembly Insturctions

STEP

1.Move the item into position and attach the end of the strap to the wall with the

appropriate screw, washer and wall plug for your wall type.

WARNING: Always ensure the area to be drilled is free from hidden electrical

wires, water and gas pipes.

NOTE: Wall fixings are not included, please source suitable fixings for your wall

type, if in doubt, please consult a qualified tradesman.

1.Ensure all parts have been removed from the carton and place on a protected

surface or carpet.

2.Check all parts are same as the Parts List.

3.Insert Legs (2) into slots underneath cabinet making sure the arrow are

aligned and secure using Bolt (A) with Washer (C) also Spring Washer (B) by

using Allen Key (D).

4.Ensure all bolts are fully tightened.