Instructions/Assembly Guide

7
Cabinet
Assembly Instructions
2
STEP
WE STRONGLEY RECOMEND THIS UNIT IS ATTACHED TO THE WALL TO
PREVENT TOPPLE. KEEP YOUR PRODUCT SAFE FROM INJURY.
Assembly Steps to attach your furniture to a wall
1. Use a pencil to mark the fixing positions on the wall- ensure the drill hole
position under product top panel.
2. Drill holes (ensure the hole position be hidden by product) and insert wall plug
(E3) into wall.
3. Attach L Bracket (E4) into plug (E3) in wall and fasten by screw (E1) with
screwdriver (not provided).
4. Attach L Bracket (E4) on back of product and fasten by screw (E2) with
screwdriver (not provided).
5. Place the product against the wall, Secure L Bracket (E4) to the L Bracket
(E4) on wall by Lock Pin (E5) as image shown.
Warning:
1. Please note this item need to be fixed on the wall to prevent falling forward
when product is in use.
2. Always ensure intended wall area to be drilled is free from hidden electrical
wires, water and gas pipes.
NB: Wall fixings are included-if not suitable- Please source suitable fixing for
your wall type. If in doubt please consult a qualified trades person.