Adelaide Assembly Instructions { INCLUDES IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Should you prefer to speak with a customer service representative, you may call toll free: 1-855-372-2315.
Limited Warranty Millwork Holdings seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases Millwork Holdings furniture from an authorized Millwork Holdings retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
Guidelines Thank you for selecting an Elle Decor piece! Our primary objective is to provide fast, friendly customer service to all of our customers. We are here to help if you have any questions, comments, or are in need of warranty replacement parts. Please call us toll free at: 1-855-372-2315 (Monday - Friday 6:00am - 5:00pm PST) Or visit our website: www.truecustomersupport.com 04 FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY • Do not stand on the item or use as a step ladder.
WARNING: DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT. Pre-Assembly Preparation: Maintenance: Please read through this instruction before beginning assembly of this item. • Inspect and tighten all bolts on a regular basis to ensure proper performance and safety. One adult assembly is recommended. • Clear out space for assembly and lay out all parts shown in parts list. Extra room will allow you to easily determine if all the pieces are present.
1 Step One: Inventory Parts A Casters Quantity: 4 D Seat & Back Cushions with Seat Plate Quantity: 1 06 B C Base Quantity: 1 Gas Lift Quantity: 1 E Allen Key Quantity: 1
2 Step Two： B A Place the Base (B) upside down and insert 4 Casters (A) into the holes on the Base (B). 3 Step Three： C Turn the Base (B) over and insert the Gas Lift (C) through the center hole on top of Base (B).
4 Step Four： Position the assembled chair upright with the seat plate facing down. Insert the gas lift (C) into the center hole of the seat plate (D).
Operating Instructions 1 To Adjust Seat Height While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release handle to lock chair at desired height. To lower the seat, lift the handle while seated. The chair will descend until the handle is released or the chair reaches the bottom position.
3 To Operate Tilt Lockout While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the seat plate) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the seat plate.
