User's Manual

For 800 cpi mouse
1. After you insert the receiver to your computer, the LED of the receiver will
flash slowly;
2. Press the reset button on the back of your mouse in 3 minutes;
reset button
3. Once the receiver link with the mouse successfully, the LED of the receiver
will blink quickly.
If the reset button was not pressed within 3 minutes after the receiver is
connected, please relocate the receiver and press the reset button again within 3
minutes.
Software Installation (Optional)
This mouse is totally compatible with Windows 98/ 2000/ ME/ XP without driver
installation. When driver supports, this mouse will be able to work under
Windows 95. Additional functions will also be available for the middle wheel.
1. Click Start and uninstall your previous mouse program.
2. Insert software diskette into drive A or B.
3. Click Start on the Taskbar and select “ Run.”
4. From the Run dialogue box, select (or type) A:\SETUP and press ENTER.
5. From the Select Device Type dialogue box, choose USB Port or PS/2 Port
and then click NEXT.
To access the software, double-click the white mouse icon on the Taskbar to
display the Mouse Properties tabs.
Software Functions
1. Wheel Mode:
l System (Intelli-Mouse) Mode.
l Enhanced Scroll Mode.
P.S. Please click “ Help” for further information.
2. Scroll Speed:
l Scroll 1 to 10 lines per scrolling unit.
l Scroll one page per scrolling unit.